iR-gas Carbon Dioxide (Infrared CO2) Gas Detector 0-5% Vol. in Brass stinting
Not quite sure?
Our expert team are here to help answer any questions you have and provide customised solutions. Send an enquiry today.
Meet our Infrared CO2 Gas Detector iR-gas 4370 Brass stinting
Our Infrared CO2 gas detector, “iR-gas 4370”, is designed for use in safe area applications. This infrared CO2 sensor uses the latest laser semiconductor technology for the detection of carbon dioxide (CO2). This Infrared CO2 sensor and electronics are one homogenous unit and must never be separated. It has an analog output that can be set to 4-20mA, 0-20mA, 0-10V, or 0-5V. This gas detector also comes in brass stinting.
| Detectable Gas | Carbon Dioxide (CO2) |
|---|---|
| Measuring Units | % vol. |
| Sensor Technology | Non Dispersive Infra-Red (NDIR), Dual Wavelength |
| Sensing Method | Diffusion |
| Accuracy | ± 2% FSD ±0.5% reading @STP |
| Response Time (τ90) | < 24 sec at STP |
| Warm Up Time | ~2 min |
| Span Calibration Gas | Synth Air |
| Zero Calibration Gas | Nitrogen |
| User Interface Type | Calibration Buttons |
| Recommended Supply Voltage | 24 VDC |
| Supply Current (Max.) | 150 mA @ 24VDC |
| Outputs | 1 x Analogue |
| Output Specifications | 0-20 mA, 4-20 mA, 0-5 VDC, 0-10 VDC (4-20 mA Default) |
| Analogue Output Specifications | 4-20 mA (500 ohms max load) |
| Dimension | 116 x 130 x 72 mm (L x W x D) |
| Weight | 300 g |
| Material | ABS Plastic |
| Material Sensor | Brass |
| Mounting | Wall Mount |
| Mounting Height | 300-500 mm From Floor |
| Operating Temperature | -25 to 55 °C |
| Storage Temperature | -40 to 70 °C |
| Operating Humidity | 5% to 95% RH (non-condensing) |
| Operating Pressure | 500 to 1050 hPa |
| IP Rating | IP40 |
| Warranty | 12 Months |
