-
Monday – Thursday 8:00 am – 5:00 pm
Friday 8:00 am to 4:00 pm
Application
Not quite sure?
Our expert team are here to help answer any questions you have and provide customised solutions. Send an enquiry today.
Application
Products in category: Application
Showing 1–16 of 30 results
-
Non-Hazardous GTQ-BS02 Gas Detector
Our GTQ-BS02 fixed gas detector is designed for industrial and commercial use. By adopting high-performance gas sensors. This non-hazardous detector has good repeatability, high accuracy, and a long lifespan, and it can be installed everywhere without a difficult installation. This mate is also recommended for protection against LPG leaks in restaurants and commercial kitchens.
This great gas detector can be used as a fixed gas detector and standalone (with a red alarm accessory).
-
E-Sense Carbon Monoxide (CO) Electrochemical Gas Detector
E-Sense is our new signature range of electrochemical gas detector. This versatile unit boasts several great features including: 2 or 3 wire operation, ability in the the 3 wire mode to be able to connect to either 4-20mA or 0-20mA controllers, it also boasts the ability to change the sensor detection range by half, other…
-
E-Sense Ammonia (NH3) Electrochemical Gas Detector 0-1000ppm
E-Sense is our new signature range of electrochemical gas detector. This versatile unit boasts several great features including: 2 or 3 wire operation, ability in the the 3 wire mode to be able to connect to either 4-20mA or 0-20mA controllers, it also boasts the ability to change the sensor detection range by half, other…
-
iR-gas Carbon Dioxide (Infrared CO2) Gas Detector 0-5% Vol. in Brass stinting
Meet our Infrared CO2 Gas Detector iR-gas 4370 Brass stinting
Our Infrared CO2 gas detector, “iR-gas 4370”, is designed for use in safe area applications. This infrared CO2 sensor uses the latest laser semiconductor technology for the detection of carbon dioxide (CO2). This Infrared CO2 sensor and electronics are one homogenous unit and must never be separated. It has an analog output that can be set to 4-20mA, 0-20mA, 0-10V, or 0-5V. This Infrared CO2 sensor also comes in brass stinting.
-
Carbon Dioxide CO2 Detector Alarm Deskie
Meet our Carbon Dioxide CO2 Detector Alarm Deskie
Our Carbon Dioxide (CO2) Detector Alarm “Deskie” is helpful for monitoring the Carbon Dioxide (CO2) level in indoor spaces, mainly in schools, offices, houses, hospitals, and aged care, among others.
This CO2 Detector Alarm warns you of poor air quality and that ventilation is required to renew the room’s air with fresh air. Not avoiding poor air quality can be a high risk of potentially contagious viruses or bacteria, low productivity in students and employees losing attention and focus, and unexpected unsafely events.
This Carbon Dioxide (CO2) Detector Alarm, “Deskie” was designed for air quality purposes that impact significantly to people who spend time in indoor areas or spaces for their health, productivity, and safety.
Moreover, this Carbon Dioxide (CO2) Detector Alarm helps to remain the air quality in good condition fresh, and clean, allowing people the adequate protection of human health and well-being.
-
iR-gas Refrigerant Gas Detector with Infrared Sensor
Meet our iR-gas 3100 Refrigerant Gas Detector enabled with an Infrared Sensor
Our refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Find the Refrigerant gases range of r134a, r410, r123, r22, and more.
-
E-Sense Ammonia (NH3) Electrochemical Gas Detector 0-300ppm
E-Sense is our new signature range of electrochemical gas detector. This versatile unit boasts several great features including: 2 or 3 wire operation, ability in the the 3 wire mode to be able to connect to either 4-20mA or 0-20mA controllers, it also boasts the ability to change the sensor detection range by half, other…
-
E-Sense Nitrogen Dioxide (NO2) Electrochemical Gas Detector Gas Sensor 0-10ppm PTFE
E-Sense is our new signature range of electrochemical gas detectors. This versatile unit boasts several great features including 2 or 3 wire operation, ability in the the 3 wire mode to be able to connect to either 4-20mA or 0-20mA controllers, it also boasts the ability to change the sensor detection range by half, other…
-
iR-gas Flush Mounted Refrigerant Gas Detector with Infrared Sensor
Meet our Flush Mounted Refrigerant Gas Detector iR-gas 3160 with Infrared Sensor
Our refrigerant leak detector with an infrared sensor functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas leak detector is designed to connect to a GDA gas detection controller or similar BMS system. This is to control alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
The refrigerant gas leak detector with an Infrared Sensor, contains a Non-Dispersive Infra-Red (NDIR) gas sensor, operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Also, this sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our Flush Mounted Refrigerant Gas Leak Detector, iR-gas 3160, is suitable for indoor use only.
For external environments, contact our specialist advice from GDA.
The iR-gas mounted refrigerant gas has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Range of Refrigerant gases: r134a, r410, r123, r22, among others.
-
E-Sense Ammonia (NH3) Electrochemical Gas Detector 0-150ppm
E-Sense is our new signature range of electrochemical gas detector. This versatile unit boasts several great features including: 2 or 3 wire operation, ability in the the 3 wire mode to be able to connect to either 4-20mA or 0-20mA controllers, it also boasts the ability to change the sensor detection range by half, other…
-
E-Sense Oxygen (O2) Electrochemical Gas Detector 0-25% vol.
Meet our E-Sense Oxygen (O2) Electrochemical Gas Detector E-Sense is our new signature range of the electrochemical gas detectors. This versatile unit boasts several great features including: 3 wire operation, ability in the 3 wire mode to be able to connect to either 4-20mA or 0-20mA controllers, it also boasts the ability to change the…
-
GTD-5000 Sampling Gas Detector Oxygen (O2) 0-25% vol.
Application of anti-malfunction algorithm to interference gas (Ethanol, FC-3283, IPA) Fast response speed by applying new infrared measurement principle Built-in high-performance pump to detect gas leakage quickly Built-in automatic flow control with flow sensor Built-in self-diagnosis function Application of proven detection principle with stable quality and service life Color graphic 1: 1 interactive parameter setting…
-
GTD-2000Tx Oxygen & Toxic Gas Detector IECEx
Meet our GTD-2000Tx Oxygen & Toxic Gas Detector IECEx
The oxygen & toxic gas detector GTD-2000Tx is also known as a toxic gas alarm. It was developed to prevent accidents caused by toxic gases in hazardous spaces such as plants, toxic gas storage and factories. When this toxic gas detector is installed it will continuously monitor for a gas leak, display the data with the integrated LCD or OLED and supply a 4-20mA standard output. Moreover, the signal to the controller can be located up to 2,500 m away from the sensor part. (When using Cable CVVS or CVVSB 1.5sq above) This toxic gas detector GTD-2000Tx should be used below 1000M above sea level.
This toxic gas detector is made of aluminium and stainless steel and holds an iECEX rating. This toxic gas detector is installed anywhere at risk of leak and explosion of toxic gas.
-
GTD-2000Tx VOC IECEx Gas Detector
Continuous detection of VOC gas in explosion hazardous area with flameproof structure Self-diagnosis function with built-in Microprocessor Excellent selectivity by adapting detection principle only for toxic gases & oxygen Superior performance for detecting toxic gases below TLV Multi-functions and high quality with low cost of ownership Built-in backlight LCD or OLED display Easy configuration of…
-
GTD-2000Ex IECEx Flammable Gas Detector 0-100% LEL
Meet our Flammable Gas Detector GTD-2000Ex IECEx
Our Flammable Gas Detector is continuously detecting flammable gases in explosion hazardous areas with flameproof structures. This Flammable gas detector is made of aluminum alloy material in a structure of complete pressure-resistant explosion-proof type (Ex d IIC T6), with the gas sensor module being composed of stainless-steel material. It displays the data of the leakage situation, embedding the LCD and OLED detection unit. The inside structure is composed of a display unit displaying measured values, a terminal unit for outputting measured values (DC4- 20mA) to the outside, and one PCB.
Usually, this flammable gas detector is installed in hazardous areas where flammable gases are likely to be exposed.
-
GTD-5100F Explosion Proof Sampling Gas Detector
Continuous detection of VOC gas in explosion hazardous area with flame proof structure Self diagnosis function with built-in Microprocessor Easy replacement with a cartridge type sensor Digital flow sensor to maintain regular flow rate Fast response of gas leakage with a high efficient pump inside Low concentration VOC gas detection by PID sensor Stable quality…
Backed by an Experienced Team of Gas Detection Professionals.
We’re here, as your mates, to advise, support and assist you at every step of your Gas Detection compliance journey.
Copyright © 2024 Gas Detection Australia Pty Ltd
ABN 74 124 402 231
ABN 74 124 402 231