iR-gas Carbon Dioxide (CO₂) Gas Detector 4350
The GDA 4350 is a 3 wire Non-Dispersive Infrared (NDIR) Carbon Dioxide (CO₂) sensor. It gives a 4-20 mA, 0-20 mA, 0-5 V or 0-10 V o/p over the range of the sensor. Low-Temperature version is available.
-
Monday – Thursday 8:00 am – 5:00 pm
Friday 8:00 am to 4:00 pm
Cellar System
Not quite sure?
Our expert team are here to help answer any questions you have and provide customised solutions. Send an enquiry today.
Cellar System
Typically, the gases used for dispensing beverages are carbon dioxide and nitrogen. Usually, gas cylinders are stored in enclosed cellars or cool rooms where leaks can result in a build-up of dangerous gases. The danger in these areas is high for workers due to the carbon dioxide and nitrogen are odourless and colourless. It is possible that workers can be overcome before realising the danger. Our CO2 detectors use NDIR technology to provide reliable accurate and cost-effective solutions for Carbon Dioxide gas detection in cellar gas detection applications. Gas Detection Australia offers a range of solutions to meet individual site requirements for carbon dioxide cellar gas detection systems and oxygen depletion detection when using nitrogen for pre-mix drinks.
Products in category: Cellar System
Showing all 15 results
-
-
iR-gas Carbon Dioxide (Infrared CO2) Gas Detector 0-5% Vol. in Brass stinting
Meet our Infrared CO2 Gas Detector iR-gas 4370 Brass stinting
Our Infrared CO2 gas detector, “iR-gas 4370”, is designed for use in safe area applications. This infrared CO2 sensor uses the latest laser semiconductor technology for the detection of carbon dioxide (CO2). This Infrared CO2 sensor and electronics are one homogenous unit and must never be separated. It has an analog output that can be set to 4-20mA, 0-20mA, 0-10V, or 0-5V. This Infrared CO2 sensor also comes in brass stinting.
-
iR-gas Flush Mounted Carbon Dioxide (CO₂) Gas Detector 4360
The iR-gas Flush Mounted Carbon Dioxide (CO2) is a 3 wire 4-20 mA Non-Dispersive Infrared (NDIR) Carbon Dioxide (CO₂) sensor. It gives a 4-20 mA o/p over the range of the sensor. Designed for applications where low-profile intrusion into a room space is required.
-
iR-gas Refrigerant Gas Detector with Infrared Sensor
Meet our iR-gas 3100 Refrigerant Gas Detector enabled with an Infrared Sensor
Our refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Find the Refrigerant gases range of r134a, r410, r123, r22, and more.
-
iR-gas Flush Mounted Refrigerant Gas Detector with Infrared Sensor
Meet our Flush Mounted Refrigerant Gas Detector iR-gas 3160 with Infrared Sensor
Our refrigerant leak detector with an infrared sensor functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas leak detector is designed to connect to a GDA gas detection controller or similar BMS system. This is to control alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
The refrigerant gas leak detector with an Infrared Sensor, contains a Non-Dispersive Infra-Red (NDIR) gas sensor, operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Also, this sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our Flush Mounted Refrigerant Gas Leak Detector, iR-gas 3160, is suitable for indoor use only.
For external environments, contact our specialist advice from GDA.
The iR-gas mounted refrigerant gas has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Range of Refrigerant gases: r134a, r410, r123, r22, among others.
-
E-Sense Oxygen (O2) Electrochemical Gas Detector 0-25% vol.
Meet our E-Sense Oxygen (O2) Electrochemical Gas Detector E-Sense is our new signature range of the electrochemical gas detectors. This versatile unit boasts several great features including: 3 wire operation, ability in the 3 wire mode to be able to connect to either 4-20mA or 0-20mA controllers, it also boasts the ability to change the…
-
GTD-2000Tx Oxygen & Toxic Gas Detector IECEx
Meet our GTD-2000Tx Oxygen & Toxic Gas Detector IECEx
The oxygen & toxic gas detector GTD-2000Tx is also known as a toxic gas alarm. It was developed to prevent accidents caused by toxic gases in hazardous spaces such as plants, toxic gas storage and factories. When this toxic gas detector is installed it will continuously monitor for a gas leak, display the data with the integrated LCD or OLED and supply a 4-20mA standard output. Moreover, the signal to the controller can be located up to 2,500 m away from the sensor part. (When using Cable CVVS or CVVSB 1.5sq above) This toxic gas detector GTD-2000Tx should be used below 1000M above sea level.
This toxic gas detector is made of aluminium and stainless steel and holds an iECEX rating. This toxic gas detector is installed anywhere at risk of leak and explosion of toxic gas.
-
GTD-5100F Explosion Proof Sampling Gas Detector
Continuous detection of VOC gas in explosion hazardous area with flame proof structure Self diagnosis function with built-in Microprocessor Easy replacement with a cartridge type sensor Digital flow sensor to maintain regular flow rate Fast response of gas leakage with a high efficient pump inside Low concentration VOC gas detection by PID sensor Stable quality…
-
GIR-3000 Gas Detector – Infrared Sensor with IECEx certificate
Meet our GIR-3000 Gas Detector, Infrared Sensor with IECEx certificate
Our GIR-3000 infrared sensor is installed in areas with a risk of gas leakage to display measured values with LCD and OLED installed in the detector by continuous detection of gas leakage, providing DC 4~20mA standard output, Isolation RS-485 communication signal, HART communication, and Relay contact signal of gas alarm. Also, DC 4~20mA standard output can connect to the maximum of 500 m (upon using CVVS or CVVSB 1.5sq Shield Cable) in transmission distance of output signals of the gas detector and receiving unit while RS-485 communication signal can be transmitted up to 1,000 m (upon using RS-485 exclusive line).
This standalone gas detector with IECEx certificate is suitable in every hazardous area. This robust and reliable infrared sensor prevents accidents by detecting different types of leak gases generated in industry fields such as plants producing or using combustible gas, carbon monoxide, carbon dioxide, gas storage places, and manufacturing processes.
-
Portable Gas Detector MGT
Meet our Portable Gas Detector MGT
Our Multi-gas detector MGT can detect four different gases (O2, CO, H2S, combustible gas) with an LCD screen, and bright and loud alarms. It is designed to withstand the harshest industrial working conditions. It delivers industry-leading alarm time, changeable alarm levels, and event logging as well as user-friendly bump test and calibration solutions. This multi portable gas detector is available with a catalytic combustible gas sensor or a long-life infrared sensor.
-
Senko iGas CO₂ Portable Detector IR 0-5% vol.
The iGAS CO₂ is a Single Gas personal monitor for carbon dioxide detection. iGAS CO₂ uses a low-power NDIR (non-dispersive infrared) sensor to provide fast and accurate detection in a compact and lightweight package. iGAS is designed to withstand the harshest industrial working conditions, with an IP66/67 protection rating, and delivers industry-leading operating time with…
-
GTD-5000F(Txp) Explosion Proof Sampling Gas Detector with Pyrolyzer
Continuous detection of toxic gases and oxygen in explosion hazardous area with flameproof structure. Self-diagnosis function with built-in Microprocessor. Easy replacement with a cartridge type sensor. Digital flow sensor to maintain regular flow rate Fast response of gas leakage with a high efficient pump inside. Stable quality and proved detection principle for service life Excellent…
-
GTD-5000F Explosion Proof Sampling Gas Detector
Continuous detection of toxic gases and oxygen in explosion hazardous area with flameproof structure. Self-diagnosis function with built-in Microprocessor. Easy replacement with a cartridge type sensor. Digital flow sensor to maintain regular flow rate Fast response of gas leakage with a high efficient pump inside. Stable quality and proved detection principle for service life Excellent…
-
2 Channel Gas Detection Controller with LCD Display
This complete 2 channel controller packs a punch with the ability to give you many options within a single package. This unit boasts 3 analogue outputs while having 3 alarm levels for each input channel, a fault relay is also ready to inform you of a system error. This controller allows you to have 2…
-
8 Channel Gas Detection Controller with LCD Touch Screen
GDA’s premium controller has many different applications due to its versatility. It boasts a full colour touch screen which allows you to view all of the 8 inputs individually. This unit has 8 configurable relays allowing you to control alarms along with Shut-off valves, fans solenoids where required (you may need extra equipment to enable…
Backed by an Experienced Team of Gas Detection Professionals.
We’re here, as your mates, to advise, support and assist you at every step of your Gas Detection compliance journey.
Copyright © 2023 Gas Detection Australia Pty Ltd
ABN 74 124 402 231
ABN 74 124 402 231