-
Monday – Thursday 8:00 am – 5:00 pm
Friday 8:00 am to 4:00 pm
R1233zd(e)
Not quite sure?
Our expert team are here to help answer any questions you have and provide customised solutions. Send an enquiry today.
R1233zd(e)
The R-1233zd is typically used in low-pressure centrifugal chillers for large air conditioning installations. The R-1233zd is non-flammable and should be used only in new equipment.
Products in category: R1233zd(e)
Showing all 3 results
-
-
iR-gas R1233ZD(E) Flush Mounted Refrigerant Gas Detector 0-1,000 ppm
Meet our Flush Mounted Refrigerant Gas Detector iR gas R1233ZD(E)
Our refrigerant leak detector with an infrared sensor functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas leak detector is designed to connect to a GDA gas detection controller or similar BMS system. This is to control alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
The R1233ZD(E) refrigerant gas leak detector with an Infrared Sensor, contains a Non-Dispersive Infra-Red (NDIR) gas sensor, operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Also, this sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
The iR-gas mounted refrigerant gas has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Finally, Flush R1233ZD(E) Mounted Refrigerant Gas Leak Detector is suitable for indoor use only. For external environments, contact our specialists’ advice.
-
iR-gas R1233ZD(E) Refrigerant Gas Detector 0-1,000 ppm
Meet our iR-gas R1233ZD(E) Refrigerant Gas Detector enabled with an Infrared Sensor
Our R1233ZD(E) refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R1233ZD(E) refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Backed by an Experienced Team of Gas Detection Professionals.
We’re here, as your mates, to advise, support and assist you at every step of your Gas Detection compliance journey.
Copyright © 2024 Gas Detection Australia Pty Ltd
ABN 74 124 402 231
ABN 74 124 402 231