Our expert team are here to help answer any questions you have and provide customised solutions. Send an enquiry today.
Refrigerant gases are used to provide a means of cooling the evaporators in freezers and air conditioning for plant rooms and chiller plants. Historically CFC refrigerant gases such as R11, R12 and R22 have been used. CFC’s are ozone depleting gases and are now being phased out and replaced by ozone friendly gases such as R134a, R407 and R410a. In more recent times we have seen the use of R1233ZD(e) and others like this.
Why is there a need to detect them?
Gas Detection Australia has a range of ultra-low level refrigerant gas leak detection systems specifically developed to prevent the expensive results of refrigerant gas leaks for R22, R123, R134a, R404, R407, R410a, R514a, R1234yf and many others.
Meets the requirements of AS/NZS 5149.3:2016 and ISO 5149-3:2014
Showing 33–48 of 48 results
Our refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Our R410a refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R410a refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Meet our iR-gas R404a Refrigerant Gas Detector enabled with an Infrared Sensor Our R404a refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas…
Our R407a refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R407a refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Our R32 refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R32 refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Our R134a refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R134a refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Our R154 refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R154 refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Our R22 refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R22 refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Our R1234yf refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R1234yf refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Our R1234ze refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R1234ze refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Our R125 refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R125 refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Our R123 refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R123 refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Our R1233ZD(E) refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R1233ZD(E) refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
We’re here, as your mates, to advise, support and assist you at every step of your Gas Detection compliance journey.