INFORMATION SHEET
/uploads/products/GDA_620_FRONT.png/uploads/products/GDA_620_DIA.png

This small potted Isolator is used for the protection of 4-20 mA signal lines against high voltage breakthrough and ground loops that give rise to noise problems. It is designed to be mounted inside or adjacent to control equipment. Cable Interface is via plug and socket.

Designed, manufactured and supported locally in Australia.

The GD 620 is a single channel galvanic 4-20mA loop isolator. It produces 1KV isolation from i/p to o/p. The unit is ideal for applications where ground noise may be present and provides an ideal isolation for ground based noise problems. It can be used for isolating voltage or current outputs to drive loads such as VSD's

  • Low cost High Performance 4-20 mA isolator
  • 1kV Isolation voltage
  • Fast speed of response
  • Excellent compliance between input and output
  • Small profile

Made in Australia and Supported in Australia


Related Products


Car Park Gas Monitoring Systems

The Gas Detection Australia car park gas detection system comprises of 1 up to 16 GDA 2525 carbon monoxide car park gas detectors per zone or level. The car park gas concentration signals are sent from the car park gas detector and the highest level from all the car park gas detectors are displayed locally on the control unit.  The latest regulations (AS1668.2-2012) call for variable extraction control and minimum flow rates. Gas Detection Australia car park system's allows variable-speed drive (VSD) control  that will meet this requirement of the australian car park gas detection standards. The car park carbon monoxide sensors (GDA 2525) are designed to be unobtrusive, simple to install and calibrate. All systems manufactured by Gas Detection Australia are built, programed and calibrated in our factory prior to delivery and will only require wiring and connecting .

Designed, Manufactured and Supported in Australia.

Air Conditioning Monitoring

Air conditioning gas detection systems are used in a number of ways. In air conditioning plant rooms  Gas Detection Australia  has  gas sensors and gas detectors  for Ammonia , Propane, CO2 and  R134a, R123, R125, R404, R407c  R410a etc. In enclosed laboratories classrooms and workspaces. The Gas Detection Australia  range of flush mounted Air Conditioning gas sensors for Carbon Dioxide GDA 4360 are used by the HVAC industry  to control fresh air input into rooms and modulate supply. In the case of VRF systems needing room air conditioning gas detection  HVAC industry uses the flush mounted GDA 3160 which are unobtrusive and used to detect low  levels of R134a, R123, R404, R407c, R410 etc.

Meets the requirements of AS/NZS 5149.3:2016 and ISO 5149-3:2014

Designed, Manufactured and Supported in Australia.

Specification NameSpecification Value
Range4-20 mA
Power Requirements24-32 VDC
Output Specifications4-20 mA
Connection3 way plug (power & I/P) 2 way plug (mA O/P)
Operating Temperature-10 - 40°C
Operating Humidity5% to 95% RH peak non condensing
Zero Drift< 0.05 mA
Enclosure RatingIP40
Warranty24 months from date of dispatch
Product Description
GD620-01  Galvanic isolator 1kV

 

/uploads/products/GDA_620_IMP.png