SENKO SI-100: Explosion Proof Gas Detector

SI-100 is an IEC Ex fixed gas detector installed where potential gas hazard occur to measure and monitor oxygen, toxic gas and combustible gas. Through the LCD display the SI-100 shows the concentration of gases present and the status of the unit in real time. It can be connected to a controller with a standard 4-20mA analog output communication. With magnetic buttons a Hot Work permit not required for calibration with no need to open the device.

IECEx Approved

SENKO SI-100C: Explosion Proof Gas Sensor

SI-100C is a IEC Ex explosion proof gas sensor ready to installed hazardous and non-hazardous areas to prevent gas hazards caused oxygen depletion, toxic gas or combustible gas. Available to detect over 25 different gas types, see Ordering Information for details.

IECEx Approved

GDA 2000Ex: Explosion Proof (IEC Ex) Flammable Gas Detector

The GDA 2000Ex is certified for use in Zone 1 Hazardous areas within Australia.

FULLY TECHNICALLY SUPPORTED by GAS DETECTION AUSTRALIA.

IECEx Approved

GDA 3000: Explosion Proof (IEC Ex) Flammable / Carbon Dioxide Gas Detector

This Infra red sensor is certified for use in Zone 1 Hazardous areas within Australia.

FULLY TECHNICALLY SUPPORTED by GAS DETECTION AUSTRALIA.

IECEx Approved

SENKO MGT: Portable Multi-Gas Detector

MGT is a Portable Multi-Gas Detector engineered for personal protection and use in confined spaces detecting Oxygen (O₂), Hydrogen Sulphide (H₂S), Carbon Monoxide (CO) and Combustible Gases

IECEx Approved

SP Secure: Flammable Gas Leak Detector

The Flammable Gas Leak Detector is designed to be suitable for leak detection of any gas piping and valves with built-in sampling pump. The SP secure can accurately measure LNG, LPG, Methane, Hydrogen or Xylene displaying the real time gas concentration.

DA 2010-01: Flammable Gas Detector

Discontinued Product

The DA 2010 flammable gas detector actively monitors for flammable gas (LNG, LPG, Methane, Propane) giving off an audio and visual warning when the factory preset alarm level of gas has been exceeded. Used to protect against gas leaks, asphyxiation and explosions in homes around Australia.

Designed, manufactured and supported locally in Australia.

DA 2010-02: Flammable Gas Detector with External Sounder/Flasher

Discontinued Product

The DA 2010 flammable gas detector actively monitors for flammable gas (LNG, LPG, Methane, Propane) giving off an audio and visual warning when the factory preset alarm level of gas has been exceeded. Used to protect against gas leaks, asphyxiation and explosions in homes around Australia. The flammable gas sensor has an external output which is used to drive an external sounder flasher.

Designed, manufactured and supported locally in Australia.

DA 2010-03: Flammable Gas Detector 12-24 VDC

Discontinued Product

The DA 2010 flammable gas detector actively monitors for flammable gas (LNG, LPG, Methane, Propane) giving off an audio and visual warning when the factory preset alarm level of gas has been exceeded. Used to protect against gas leaks, asphyxiation and explosions in homes around Australia. The unit will need to be connected to a 12- 24 VDC source power supply. 

Designed, manufactured and supported locally in Australia.

DA 2010-04: Flammable Gas Detector 12-24 VDC (User Supplied) With Switched Output

Discontinued Product

The DA 2010 flammable gas detector actively monitors for flammable gas (LNG, LPG, Methane, Propane) giving off an audio and visual warning when the factory preset alarm level of gas has been exceeded. Used to protect against gas leaks, asphyxiation and explosions in homes around Australia. The flammable gas detector has a volt free external output which is used to drive external loads such as solenoid or shut off valves. The output is a SPCO relay rated 1 A.

Designed, manufactured and supported locally in Australia.

GDA 40126: Flammable Gas Detection Controller

Discontinued Product

The GDA 40126 Gas Detection Controller is a standalone gas detector unit with inbuilt display, sounder, flasher, relays and alarm driver. Available for Flammable gases such as LNG, LPG, Propane, Hydrogen, Acetylene, Solvents, and other flammable vapours. Designed to be used in Non-hazardous areas with the GDA 2500 series easily replaceable sensor modules.

Designed, manufactured and supported locally in Australia.